Petrographic study (petrographic definition) Dolomitic limestone
  Flexing resistance (minimum expected value) 9.6 Mpa
  Flexing resistance (minimum expected value after 48 frost/thaw cycles) 7.8 Mpa
  Abrassion resistance ( maximum value) 19 mm
  Open porosity:  1,6 %
  Density:     4449,6 Lb/yd³     2640 Kg/m3
  Water absortion at atmospheric pressure (average value) 0,4 %
  Water absortion at atmospheric pressure (maximum value) 0,5 %
  Flexing resistance (average value) 16,3 Mpa
  Flexing resistance (average value alter 48 frost/thaw cycles ) 12,6 Mpa
  Abrassion resistance (average value) 18,5 mm
  Resistance to compression  (average value) 237 Mpa
  Resistance to compression  (minimum value) 169 Mpa
  Resistance to sliding in wet conditions in polished finish (minimum value) 7
  Resistance to sliding in wet conditions in polished finish (average value) 10
  Resistance to sliding in wet conditions in aged finish (minimum value) 10
  Resistance to sliding in wet conditions in aged finish (average value) 11
  Resistance to sliding in wet conditions (minimum value) 33
  Resistance to sliding in wet conditions (average value) 37
  Resistance to sliding in wet conditions in “flamed finish” (minimum value) 69
  Resistance to sliding in wet conditions in “flamed finish” (average value) 71
ASTM TEST (U.S. Standars)
Absorption  and  bulk  specific  gravity. ASTM C-97
Absorption  (%): 1,45 ± 0,04
Bulk specific gravity (kg/m³): 2550 ± 20
Compressive   strength. ASTM C-170
Compressive strength  in dry conditions (Mpa):  74,2 ± 14,3
Compressive strength in saturated conditions (Mpa): 83,5 ± 6,7
Flexural   strength. ASTM C-880
Flexural strength in dry conditions (Mpa): 11,1 ± 1,5
Flexural strength in saturated conditions (Mpa): 10,5 ± 1,7


Tested in the natural stone laboratory of the "Centro Tecnologico del Marmol" in Murcia (Spain).
Tested in "Alicante University Laboratory" (Spain).

 

 
With the declaration of conformity is declared that the marketed product is in compliance with the regulatory requirements of the harmonized standards or technical specifications, depending on the application and intended use of the product, according to the Construction Products Directive 89/106 / EEC.